How to unlock your iPhone with Windows

[Admin]

How to unlock your iPhone | Windows

DISCLAIMER: I AM NOT RESPONSIBLE FOR ANYTHING THAT MIGHT
HAPPEN TO YOU OR YOUR IPHONE WHILE DOING THIS. YOU WOULD
HAVE TO HAVE VERY BAD LUCK TO MESS ANYTHING UP DOING THIS
BUT AGAIN. USE AT YOUR OWN RISK!!!!!!!!!!!

This process will asume you are stuck at the activation screen on your iPhone and it is brand new out of box. If it is not, restore it back to version 1.0.2 but make sure you do not update or restore PAST 1.0.2 because this unlocking process probably will not work anymore. All the files needed for this process are included in this download and the only thing you need is a computer and of course an iPhone

1. First, Make sure the iPhone is version 1.0.2 if it is not you might have to activate, then update to 1.0.2. If the phone is older and is NOT version 1.0.2 try using a hacked version of iTunes and dvdjon’s activation server to get access to iTunes
   restore/update firmware option. To do that, you will need to have the .NET Framework 2.0 installed on your computer. I will not include the files for that here, as they are readily available all over the internet. I left the original ATT Sim card in the phone while doing the unlock.
2. If the iPhone is brand new and out of the box with fw ver. 1.0.2 or is already updated to 1.0.2 open iBrickr.exe and select “Free my iPhone!”. This will automatically jailbreak your iPhone for you with no need to activate first. If iBrickr says the iPhone is not connected, restart your iPhone and your computer and try again.
3. Once done the iPhone has to break jail, reboot the iPhone into recovery mode by holding down the power button and the guide button for around 25 seconds but DO NOT let go until the phone turns on and then gives the black screen with the yellow triangle with the exclaimation mark that says Please Connect to iTunes. iBrickr will automatically detect this mode and then start modifying the phone which can take
   some time. When it is done successfully, iBrickr will finish and click on the button that says “Sweet!”. iTunes may open itself, just go ahead and close it and iBrickr.
4. Open up the PACAY folder included with this file and run the, “(CLICK HERE) activate.bat” file. It will ask you if you are ready, just make sure that you have charged your iPhone and is still docked and on. If you are ready hit space bar or any button. It will go through a few processes and when it stops, it will ask you to restart your iPhone again. You do NOT need to restart it into recovery mode, just hold the power button until it shows the red slider and slide it off. When you see it
   shut off, turn it back on and Wait for it to start up. This is called a soft-restart. If iTunes pops up, just close it again
5. Now go back to the PACAY dos window and hit spacebar again. Your iPhone should now be activated with YouTube support! Hit spacebar one more time to close the window.
6. This is when I installed AppTapp which is a VERY nice installer program. I do not believe it is mandatory, but it will install some custom programs to your iPhone effortlessly such as Games, OpenSSH, chat clients, wallpaper packages, Ringtones and more. If you do not want to do this, skip to step 7. Open AppTappInstaller.exe and make sure iTunes is closed. Select version 1.0.2 and click install. It will automatically terminate iTunesHelper and iPhoneComm for you so you do not need to worry about this. You will hear your iPhone turning on and off which is normal. When it is done go ahead and close it.
7. Now, on your iPhone go to, “Settings” then, “General” and change Auto-Lock to “Never”. You do not HAVE to do this anymore with this procedure, but it helps when trying to see if the iPhone is done flashing later on.
8. Open iBrickr and if you have jailbroken it correctly, it should give you a couple options like Ringtones, sounds, Applications and Files. Select Applications. Click Install PXL. It will do some preparing, then it will tell you to restart your phone. Do
   it again as a soft-restart by holding just the power button. Click ahead. It will ask you to restart again, Do so. When its finished rebooting, click “Check PXL”. You will now be at the Applications manager. Click “Install from PXL”. It will open up a browsing window. Just go find the unlock.PXL file in this folder and select the Unlock.PXL file and it will automatically install. When its finished it will say Install Complete. Give the iPhone about 30 seconds to get the PXL package installed and ready on your iPhone. When its finished, it will automatically soft-reset. Close iBrickr.
9. Run unlock.pxl which is the newest icon on your iPhone. It should say “All files found.” then hit the Start button in the top left. It will copy some files, stop some services and flash the firmware. This process WILL take AT LEAST 20 minutes, so don’t freak out thinking that it broke. I know you are anxious but just chill out. When its finished, it will run the baseband updater and start the iPhone services and tell you it is completed
10. Restart your iPhone, insert the SIM card of your choise and make some calls!
11. Run iBrickr again Applications-> on the Right hand side on the iPhone thingie, click the minus next to unlock to uninstall it.You can also remove the uninstaller this way. You do not want to fun the unlock app again once you have your phone
    unlocked.
12. Now enter you Edge Setting which can be found below
    SETTINGS -> GENERAL -> NETWORK -> EDGE (ENTER YOUR EDGE SETTINGS)

*** If you Youtube doesn’t work after the unlock Run PACAY's activate.bat AGAIN (fix youtube again)

Carrier APN Settings:

These pages contain carrier APN settings, for setting up your iPhone with other carriers data services.
T-Mobile
APN: wap.voicestream.com
Timeout: 15 minutes
Primary gateway IP: 216.155.165.50
Port: 8080
Secondary gateway IP: 216.155.165.50
Port: 8080

Cingular
APN: wap.cingular (lower case)
PDP_Type: IP
Gateway IP Address: 66.209.11.61
Port: 9201
Home Page: http://device:home or http://device.home
Session Mode: Permanent
Connection Security: On
Authentication Type: Secure
Login Type: Automatic
User Name: WAP@CINGULARGPRS.COM (All upper case)
Password: CINGULAR1 (All upper case)

MMS Settings:
Service Name: MMS
Server Name (mmsc): http://mmsc.cingular.com
Web Session Name: MMS

Rogers
APN: internet.com
Primary gateway IP: 172.25.0.107
Username: wapuser1
Password: wap

The above didn't work for my iphone, but this did...
APN: internet.com
Username: guest
Password: guest

Check other settings from file below!

DOWNLOAD FILE TO UNLOCK:
iPhone.Unlocking.with.Windows.rar

Enj0y!=)

[duccom]

thank for sharing

[tejas2008]

hey dude what is the password for unrar fr this file

[Admin]

Originally Posted by tejas2008

hey dude what is the password for unrar fr this file

Hello tajas! TO EXTRACT THE PASSWORD IS: mobile